Home > News > Content
Product Categories

What Are The Reasons For The Failure Of Plastic Rollers Braking?

The main reasons for the failure of Plastic Rollers brake are:

1, whether the air pressure is abnormal, such as whether the pump is abnormal, whether gas leakage or blockage.

2. Whether the brake block is damaged or not.

3. Whether the brake discs on both sides of the Plastic Rollers are defective.

4, the operation of brake switch system is faulty, so that the brake command transmission is not smooth.

5, whether the power transmission system in time to cut off power.

6, for the belt friction brake, should check whether the friction belt loose or friction factor drops, should be adjusted

Applicable to all types of boxes, bags, pallets, such as the delivery of goods, bulk materials, small items or irregular items should be placed on pallets or turnover box transport. Capable of conveying a single piece of material of great weight or withstanding a larger impact load. Structure: According to the driving mode can be divided into dynamic roller line and no power roller line, according to the layout of the form can be divided into horizontal conveyor Plastic Rollers line, tilt conveyor Plastic Rollers line and turning Plastic Rollers line. Customers can also request special design to meet the requirements of all types of customers. Standard gauge Plastic Rollers line within the width of 200, 300, 400, 500, 1200mm and so on. Other special specifications can be adopted according to customer's requirement. Turning Plastic Rollers line standard turning radius of 600, 900, 1200mm, etc., can also be used according to customer demand for other special specifications. The roller diameter of the straight section is 38, 50, 60, 76, 89mm and so on.


Products categories
Uhmw Sheet
Plastic Rollers
Uhmw Polyethylene
Contact Us
Tel: +86-372-5051360
Fax: +86-372-6257189
Mob: +86-15518858613
Add: Tangyin Yigou industry zone,Anyang,Henan,China.
Email:sales@dyuhmwpe.com
Feedback