Home > News > Content
Product Categories

Use And Maintenance Of Rubber And Plastic Conveyor Roller

Edit:Tangyin Dingyuan Engineering Plastics Co.,LtdDate:Sep 27, 2017

A rubber Plastic Conveyor Roller between the pressure of heavy rubber Plastic Conveyor Roller between the pressure is heavy, will increase the friction between the rubber Plastic Conveyor Roller, the rubber Plastic Conveyor Roller heating up, increasing the rubber Plastic Conveyor Roller between the Extrusion, to accelerate the aging and deformation of the rubber Plastic Conveyor Roller, to speed up the ink and water emulsification process, this is not conducive to the transmission of ink.

The solution is that the pressure between the rubber and Plastic Conveyor Rollers should be substantially the same as the pressure of the contact plate. Experience is to use a piece of 1500 silk, 75px wide plug plug plastic rubber conveyor roller between, can feel a certain force on the line.

After scrubbing, then wipe with a clean cloth and then put the rubber plastic conveyor roller on the machine to facilitate the next use.

Second, the rubber Plastic Conveyor Roller surface of the crystallization of the surface of the crystallization of the rubber Plastic Conveyor Roller surface of the pores, will make the rubber plastic roller loss of the role of ink, resulting in uniform ink delivery cloth, prone to ink emulsification.

The solution is to: the machine on the rubber plastic conveyor roller unloaded, with the shelf flat, take the cloth group of kerosene and pumice powder, forced evenly rub the surface of rubber plastic conveyor roller, the rubber plastic conveyor roller surface crystallization layer Wipe off the rubber color of the original rubber Plastic Conveyor Roller, and then wash the kerosene and pumice powder remaining on the rubber Plastic Conveyor Roller with the washing water or the gasoline to re-install and adjust the pressure of the rubber Plastic Conveyor Roller.

Third, the rubber and plastic conveyor roller bearing maintenance In the high-speed operation of the machine, the rubber plastic conveyor roller wear on the bearing is very obvious, especially the operator usually heap bearing maintenance cloth Note that the wear even more powerful. Rubber plastic conveyor roller bearing to a certain degree of damage, it will produce rubber plastic conveyor roller jitter friction and extrusion, reducing the life of rubber plastic conveyor roller. And will make the printed products have "ink, water bar" phenomenon. So the operator should be required to take a week to take the rubber plastic conveyor roller, to the bearing with butter, those who wear badly, bad rotation of the bearing replaced, to ensure the normal use of rubber and plastic conveyor roller.


Products categories
Uhmw Sheet
Plastic Rollers
Uhmw Polyethylene
Contact Us
Tel: +86-372-5051360
Fax: +86-372-6257189
Mob: +86-18603725242
Add: Tangyin Yigou industry zone,Anyang,Henan,China.
Email:info@dyuhmw.com
Message