Analytical Research Polymer Polyethylene Wear Plate Adapted Temperature
In daily life, we often use polymer polyethylene wear plates in daily life. Today we will study and analyze the temperature suitable for polymer wear plates.
The ambient temperature of the polymer wear plate is generally not more than 80 °C. Do not use external force to damage its structure and loosen the fasteners at will. The time of the polymer wear-resistant board material in the quiescent state in the warehouse should not exceed 36 hours (please do not stay in the warehouse for viscous materials to prevent agglomeration), and the material with water content less than 4% can prolong the rest time. The polymer wear plate is used for the first time. After the material of the silo is stored to two-thirds of the capacity of the entire warehouse, the material is discharged.
In the operation of the polymer wear plate, it is necessary to always keep the material in the bin of the material entering and leaving the bin, and always keep the material storage in the bin more than one-half of the capacity of the bin. It is strictly forbidden to directly impact the liner. Polymer wear-resistant plate The hardness of different materials is different. The material and flow rate must not be changed at will. If it needs to be changed, it should not be greater than 12% of the original design capacity. Changing the material or flow rate will affect the service life of the liner.