Notes About Using UHMWPE Lining Board
When using uhmwpe lining board,please observe the following instructions and precautions:
1, the first time, to be silo material storage to two-thirds of the entire storage capacity, and then unloading.
2, In operation, it is necessary to always maintain the pile of material in the warehouse at the falling point of the incoming bin and keep the material storage in the bin at half of the capacity of the whole bin.
3, The material is not directly impact uhmwpe liner plate.
4, The hardness of various materials particles are not free to change materials and flow, if changes need to be greater than 12% of the original design capacity, free to change the material or flow rate will affect the service life of uhmwpe liner sheet.
5, The use of ambient temperature, generally not more than 100 ℃.
6, Do not use external force to destroy the structure and loose fasteners.
7, The material in the warehouse at rest time should not exceed 36 hours (more viscous materials, please do not stay in the warehouse, to prevent caking), the moisture content of less than 4% of the material may be appropriate to extend the rest time.
8, When the temperature is low, please note that the material in the warehouse of quiescent time, to avoid the production of frozen block.