Ink roller ink leakage inspection
Is output from the ink fountain ink roller ink rollers, using regular ink spills occurred during the case. General leak ink in the ink block and blade contact areas, due to longer wear, can cause interface leak ink, so you can repair according to the following methods: first remove the ink fountain, remove the ink ink block and knife respectively, and then use the stone to Polish the contact area. Mount blade and the ink after finish sanding block, measured by thickness of 0.03mm plug the gap. Ink key zero does not fit with the actual zero reason for long time use. Inking with a screwdriver on the screw Rod fastening screws loosen, then measured with a thickness of 0.03mm plug the ink roller and the clearance between the blade, if applicable, to tighten the fastening screws.